Internet Dealer for :

National Public Seating Cafeteria Tables

Click here to see detailed specifications

The new National Public Seating cafeteria tables are available in both Bench Style and Stool Styles (click on the picture for pricing and details of each)

Mobile Bench -Table

The NPS Mobile Cafeteria Bench Tables are available in two "series" (and are priced accordingly): The PW Series: Tabletops - Consist of high pressure laminate bonded to a 3/4" thick premium grade plywood with the unique NPS "protect-edge" sides. Benches - Consist of high pressure laminate bonded to a 1" thick premium grade plywood with the unique NPS "protect-edge" sides. The PB Series: Tabletops - Consist of high pressure laminate bonded to a 3/4" thick solid industrial grade particleboard with T-mold edges. Benches - Consist of high pressure laminate bonded to a 1" thick solid industrial grade particleboard with T-mold edges.
Tabletops are supported by 14 gauge steel frames and leg assemblies are made of heavy duty 14 gauge  steel tubing with 4 inch casters. Wheels automatically  lift off of the ground when table is opened.
		With a unique bench design, entering for seating  is hassle-free as there is no need to climb over benches to sit down.
With the NPS unique fold-up bench system, floor cleaning is simple without the need to fold or move the unit.   Easy bench removal  makes the unit ADA compliant.
		Tabletops and benches are made with high pressure laminate and are available with our unique "protect-edge" coating (PW Series only) that surrounds the edges to prevent trapping of food or bacteria.
The safety latch secures the unit in the closed position for safe moving and storage. Due to the unique design of our  fold-up benches, benches stay protected during shipping.
		Entrance locations are chrome plated to prevent wear to the unit.
Standard Laminate Colors   Blue   Green   Red   Yellow
Light Oak	Grey		Walnut

Mobile Cafeteria Tables:  WITH BENCHES  (click here for stool table pricing)

Freight is a function of weight & distance.
Freight cannot be calculated without some basic information.
 Please either click on the link below to fill out a Freight Request Form or feel free to call us at 1-888-524-2582 and we will be happy to help you.

Click Here for a Freight Quote (click here)

International Freight Requests (click here)

You can contact us at 1-888-524-2582
or info@tablesnchairs.com for general inquiries.

Mobile Stool -Table

Our chrome-plated mobile cafeteria stool tables are built with strong 14 gauge tubular steel
and 14 gauge frames.
 For storing, our units easily lift and close using our torsion bar system.  High quality sturdy tables with a 15 year warranty and it ships in 4 days!

Click here to see detailed specifications

The table locks at the midway position for easy cleaning. The 4 inch caster wheels automatically lift off the ground when the table is opened.
Tabletops consist of high pressure laminate bonded to a 3/4" thick premium grade 7 layer plywood. The tabletop sides are protected with our unique "protect-edge" coating that surrounds the edges of table tops to prevent the trapping of food or bacteria.
	Stools are 13" diameter made of high impact ABS plastic and are attached to a 1 1/4" diameter support post. These high impact plastic stools are durable and reinforced with multiple plastic strengtheners.
The safety latch secures the unit in a closed position for safe moving and storage. The latch can be operated from both sides of the table.
	Non-obstructive entrance allows easy access to each stool. Our chrome plated strong 14 gauge tubular steel frames are sturdy and long lasting with a 15 year warrantee.
Stools are available in 8 colors!

Standard Laminate Colors   Blue   Green   Red   Yellow
Light Oak	Grey	Walnut

Mobile Cafeteria Tables:  WITH STOOLS

Freight is a function of weight & distance.
Freight cannot be calculated without some basic information.
 Please either click on the link below to fill out a Freight Request Form or feel free to call us at 1-888-524-2582 and we will be happy to help you.

Click Here for a Freight Quote (click here)

International Freight Requests (click here)

You can contact us at 1-888-524-2582
or info@tablesnchairs.com for general inquiries.

Specifications: MTB - Mobile Bench Table

 General

Folding, mobile cafeteria table with attached folding benches shall have a top surface measuring 30” wide. The top surface shall be 29” high when opened for use. The top length shall be 12’ or 10’ or 8’. Each bench unit shall have four fold-up benches that can be opened for use and closed for easy floor clean up and bench protected shipping.

Entrances

Each bench unit shall have six walk-in entry points. Benches shall be attached to the table structure in a manner that does not significantly obstruct the user from entering from either end or between the benches. Any metal component located near the floor, where feet may come into contact with them shall be chrome plated. All other metal frame components should be epoxy powdercoated.

Locking

A security lock shall tightly lock the table in the open position and must be capable of operating from both sides of the table. The lock rod shall be 7/16 diameter and chrome plated to resist wear. The table shall also be fitted with a midway position lock to allow units to be secured in a partially folded position for easier and faster mobility.

 Tabletops and Benches

Option 1: Particleboard core with vinyl T-molding

Tabletops shall be surfaced with high pressure laminate bonded to a 3/4” thick 47 lb. particleboard core, sealed underneath with a phenolic backer sheet. Benches shall be surfaced with high pressure laminate bonded to a 1” thick 47 lb. particleboard core, sealed underneath with a phenolic backer sheet. Edge of the top shall be banded with vinyl T-molding, secured by staples to the tops underside approximately every 10”.

Option 2: Plywood core with TuffEdge guard

Tabletops shall be surfaced with high pressure laminate bonded to a 3/4” thick AC grade plywood core, sealed underneath with a phenolic backer sheet. Bench shall be surfaced with high pressure laminate bonded to a 1” thick AC grade plywood core, sealed underneath with a phenolic backer sheet. Edge of the top shall be sealed with a polyurethane epoxy resin, chemically bound to the edge of the laminate, core and backing sheet.

Table top Support

Each top shall be supported by two 1-7/8” deep, 14 gauge steel apron. Apron shall contain no holes greater than ½” diameter and shall be capped at the ends with riveted plastic protectors. Each top shall be supported in at least two places.   

Leg assemblies

Vertical tubes supporting the benches shall be constructed of 1-1/4 “ diameter, 14 gauge steel tubing with 11 gauge tubing used on the base of the end leg assemblies. The bench support arm shall be constructed of 14 gauge chrome plated rectangular steel. All other tubular components shall be 1.05” diameter, 14 gauge steel tubing, or structural members of equal or greater strength.

Casters

Casters shall be heavy-duty, double ball baring type with a minimum rated load capacity of 275 lbs. each. Casters should have hard rubber non-marking wheels 4” diameter x      1-1/4” wide.

Safety Requirements

Bench units shall be safety tested and listed by Underwriter’s Laboratories, Inc. Bench units must display UL labels with valid UL file number.

When bench unit is opened for use, all casters shall lift off the ground automatically so the table does not roll. Casters that protrude past the end of the bench unit when opened for use, are prohibited to prevent tripping hazard.

Bench units shall have no moving parts that can pinch, cut or pierce the operator’s hands while the table is being folded up and down.

Warranty

Mobile bench units shall be covered by 15-year warranty.

 Specifications:  MTS - Mobile Stool Table

 General

Folding, mobile cafeteria table with attached stools shall have a top surface measuring 30” wide. The top surface shall be 29” high when opened for use. The top length shall be 12’ or 10’ or 8’. The table shall have 12 or 8 stools. Leg assemblies shall be chrome plated. All other metal frame components should be epoxy powdercoated.

Entrances

Each stool position shall have its own entrance clear of obstructions when entering the unit to sit down. Stool units having support members running across the entrance area are not acceptable.

Locking

A security lock shall tightly lock the table in the open position and must be capable of operating from both sides of the table. The lock rod shall be 7/16 diameter and chrome plated to resist wear. The table shall also be fitted with a midway position lock to allow units to be secured in a partially folded position during floor maintenance and for easier and faster mobility.

Tabletops

Plywood core with TuffEdge guard

Tabletops shall be surfaced with high pressure laminate bonded to a 3/4” thick AC grade plywood core, sealed underneath with a phenolic backer sheet. Edge of the top shall be sealed with a polyurethane epoxy resin, chemically bound to the edge of the laminate, core and backing sheet.

Table top Support

Each top shall be supported by two 1-7/8” deep, 14 gauge steel apron. Apron shall contain no holes greater than ½” diameter and shall be capped at the ends with riveted plastic protectors. Each top shall be supported in at least two places.   

Leg assemblies

Tubular leg components shall be 1.05” and 1 ¼” diameter, 14 gauge steel tubing. Legs and stool columns shall be constructed of 1 ¼” diameter, 14 gauge steel tubing and shall be braced horizontally to the stool support column on the opposite side of the table to resist bending. Units with stools braced from the floor are not acceptable.

Stools

Stools shall be injection molded with a minimum of 25 oz. of Rubber modified, high impact, polystyrene materials measuring 13” in diameter. Stools shall be reinforced against breakage with a minimum of 12 integrally molded, tapered ribs. Ribs shall extend from the outer parameter of the stool to the mounting hub at the center if the stool. Stools shall be mounted with 5/16” diameter bolts and locking nuts. Spring pins are not acceptable.

Casters

Casters shall be heavy-duty, double ball baring type with a minimum rated load capacity of 275 lbs. each. Casters should have hard rubber non-marking wheels 4” diameter x      1-1/4” wide.

Safety Requirements

Bench units shall be safety tested and listed by Underwriter’s Laboratories, Inc. Bench units must display UL labels with valid UL file number.

When bench unit is opened for use, all casters shall lift off the ground automatically so the table does not roll. Casters that protrude past the end of the bench unit when opened for use, are prohibited to prevent tripping hazard.

Stool units shall have no moving parts that can pinch, cut or pierce the operator’s hands while the table is being folded up and down.

Warranty

Mobile stool units shall be covered by 15-year warranty.

Product Type:

Folding Tables | Folding Chairs | Stackable Chairs | Dining Chairs | Dining Tables | Lobby Furniture | Café Tables | Stools & Benches | Outdoor Tables and Chairs
Podiums & Lecterns | Stages & Choral Risers | Seminar Tables | Computer Desks | School Furniture

Product Brands:

Correll | Dakota Wave | emu Contract | Holsag | Maywood Furniture | National Public Seating | Oklahoma Sound
RABO | Seatability | Southern Aluminum | Virco

Home | About Us | Testimonials | Ordering Info | Site Map

Copyright © 2008 Tablesnchairs.com, LLC. All rights reserved.