Table Subsurface
All top panels, cross bracing and end caps are high
strength alloy 6063-T6 extruded aluminum smooth
finish. Top surfaces are .080" thick with integral
stiffener ribs; perimeter edges are heavy gauge and
have a high impact cast corner protective insert
which will take abuse from frequent set-up/take
down. Aluminum feedstock contains
recycled aluminum.
Southern Aluminum products are
recyclable. Painted surfaces are thermal set
powder-coated finishes and have the hardest surface
and maximum scratch/mar resistant qualities in the
industry. Table edges utilize a reinforced inside
radia impact resistant design capable of
withstanding frequent usage. Fasteners are aluminum
rivets and zinc-plated steel. All edges on the table
top have a smooth rounded edge, including corners.
Table will withstand a drop squarely on its
edges/corners from a height of 24" without splitting
apart, cracking or creating sharp corners. Southern
Aluminum products have a
Lifetime Guarantee - for as long as you own them!
Table Surface
Inlay surface is high pressure laminate from
WilsonArt™ with premium scratch resistant finish,
permanently bonded with contact adhesive.
Manufacturer provides 5-year warranty on laminate.
Colors
View laminate options and inlay colors at
www.wilsonart.com.
Load Capacity
All tabletops will support up to 4,000 lbs. of
distributed weight. All aluminum leg styles are
tested to exceed 2,000 lbs. of direct weight on each
leg.
Legs
All legs, except I Leg style, are welded together
for strength, then attached to the table with
zinc-plated bolts and nuts. All leg styles are a
standard 29" height. Legs will not conduct
electrical current. Powder-coat paint is applied for
finishing on all leg styles. Tube openings are
covered by caps.
Seminar Leg Styles
The Seminar folding legs are 1 1/2" extruded square
aluminum with .065" wall thickness high strength
alloy 6063-T6 aluminum smooth finish.
